2014 Prerequisites

From cctbx_xfel
Revision as of 21:57, 22 August 2014 by Aaron (Talk | contribs)

Jump to: navigation, search

We would like all users at the BioXFEL workshop to be using the same set of cctbx.xfel sources. To this end, please be sure you do not source any locally downloaded or installed phenix or cctbx versions in your .bashrc or .cshrc files. Instead, follow the instructions below to use the sources installed for general users at SLAC.

The below directions are for bash. You can find the csh associated equivalents by following the linked pages.

You may find the general overview to be useful first.

Set up PSDM

The Photon Science Data Management (PSDM) system provides pyana, and is required for reading the raw data saved by the CSPAD detector. Follow the instructions at Set up PSDM software, using the PSDM suite installed at SLAC, or simply add this to your .bashrc file:

test -r /reg/g/psdm/etc/ana_env.sh && . /reg/g/psdm/etc/ana_env.sh

Then execute these commands from your home folder:

newrel ana-current myrelease
cd myrelease
sit_setup
newpkg my_ana_pkg

This creates a new working directory from which to execute pyana commands named myrelease, then configures it.

Set up cctbx.xfel

cctbx.xfel is installed for general users at SLAC and maintained by the cctbx.xfel team. Follow the setup instructions for cctbx.xfel, using the SLAC sources as described, or simply add this to your .bashrc file:

test -r /reg/g/cctbx/build/setpaths.sh && \
 . /reg/g/cctbx/build/setpaths.sh

Then, from your myrelease directory, link PSDM to cctbx.xfel as follows:

cd my_ana_pkg
ln -fns /reg/g/cctbx/sources/cctbx_project/xfel/cxi/cspad_ana src
cd ..
scons